GorillaPod (UPDATE 2)
GorillaPod (UPDATE 2)
Published 2019-09-11T17:19:33+00:00
This is a 3D printed GorillaPod. Fully 3D printable without supports.
FOLLOW THE INSTRUCTION IMAGE
YOU'RE FREE TO REMIX AND REDESIGN EVERY PART! I would love to see your changes and improvements
The camera mount is made for MY OWN CAMERA PLATE. I suggest to design a new mount for your camera. The scew of the ball is and ISO M10x2 - 10 mm.
The materials are very important to make it very solid and robus:
- The ball joints should be in ASA or ABS, for durability and elasticity.
- The rings MUST be in any FLEXIBLE filament.
- The rest could be in PLA, but is suggest to use ABS or ASA for all the pieces
To tighten the ball i suggest to use a metal screw instead of a 3d printed one. I had a 10 mm screw wth exsagon end, so I designed for my own.
YOU'RE FREE TO REMIX AND REDESIGN EVERY PART! I would love to see your changes and improvements
Hi, I updated the design to use a 10 mm screw and a nut. It improves the stability a lot. The plastic thread tended to break.
THE TRIPLE JOINT MUST BE IN FLEXIBLE FILAMENT
The camera mount is made for MY OWN CAMERA PLATE. I suggest to design a new mount for your camera. The scew of the ball is and ISO M14x2 - 14 mm.
The materials are very important to make it very solid and robus:
- The ball joints should be in ASA or ABS, for durability and elasticity.
- The rings MUST be in any FLEXIBLE filament.
- The rest could be in PLA, but is suggest to use ABS or ASA for all the pieces
Date published | 11/09/2019 |
Support Free | YES |
Thanks for the desing!(in the image there is one 500ml bottle and a rubick's cube)(also used this desing for the phone mount https://www.myminifactory.com/object/3d-print-modular-mounting-system-34864 (the arm has been modified))