Marco's Wand
4,329
views
147
downloads
1
collection
0 comments
Loading comments...
Marco's Wand
3D
Published 2017-12-04T11:52:31+00:00
34
0
Add to Collection
Description
A 3D printed replica of the shape that Star Butterfly's wand takes when is held by Marco during the third season of Star vs the forces of Evil.
Instructions:
Download the STL files and print them with the following settings
- Blade.stl: 0.15mm layer height, 15% infill, No supports
- Jewel.stl: 0.10mm layer hieght, 10% infill, No supports
- FaceA.stl: 0.30mm layer height, 25% infill, Supports enabled
- FaceB.stl: 0.30mm layer height, 25% infill, Supports enabled
- Cover.stl: 0.30mm layer height, 25% infill, Supports enabled
- Wing.stl (2 times): 0.30mm layer height, 20% infill, No supports
- OrbA.stl: 0.30mm layer height, 25% infill, Supports enabled
- OrbB.stl: 0.30mm layer height, 25% infill, Supports enabled
- OrbPin.stl (2 times): 0.20mm layer height, 50% infill, No supports
- UprCap.stl: 0.30mm layer height, 30% infill, No supports
- Rod.stl (2 times): 0.30mm layer height, 50% infill, No supports
- RodPin.stl (2 times): 0.20mm layer height, 50% infill, No supports
- LwrCap.stl: 0.30mm layer height, 30% infill, Supports enabled
- TipA.stl: 0.10mm layer height, 25% infill, No supports
- TipB.stl: 0.10mm layer height, 25% infill, No supports
After all the pieces have been printed, assemble them following the diagram. I suggest to use superglue (cyanoacrylate) to hold them together. The parts can be painted easily using acrylic paint.
I made an Imgur album showing the assembly process!
Technical Information
Date published | 04/12/2017 |
Technologie | FDM |
Schwierigkeitsgrad | Easy |
More Information
Object Parts