Monster High Flexible Wig
Monster High Flexible Wig
Published 2015-09-22T15:31:39+00:00
A piece from our MyMiniFactory Monster High Hack project*. Check out the parts created so far.
The download contains a 3D printable version of the Monster High flexible wig.
You can -
1. Download, and 3D print in your favourite flexible filament of choice.
2. Download the STL, import into your favourite design software (e.g zbrush), cusomise and then print!
How?
The primary mesh's were generated using a David 3D scanner at the Imakr store London. The scans were cleaned in Zbrush, and test printed in Ninajaflex filament.
Set you printer to it recommended settings for flexible filament - e.g Makerbot flexible filament settings 0.20mm layer height low infill We printed with support off, but for a cleaner print turn support on. Total print time is 1 hour 42 minutes and uses 23g of filament.
Date published | 22/09/2015 |
Benoetigte Zeit | 60 - 102 Minuten |
Menge an Filament | 23g |
Dimensionen | 59 x 55 x 49 mm |
Technologie | FDM |
Schwierigkeitsgrad | Easy |
Support Free | YES |