Prusa i3 Mk2S Camera Mount (Using standard tripod mount)
Prusa i3 Mk2S Camera Mount (Using standard tripod mount)
3D
Published 2017-08-14T10:51:22+00:00
Webcam mount to monitor prints remotely whilst away from the printer. I've designed this mount to work with any standard tripod screw although the screw will need to be long enough to go through the 5mm body of the print prior to to screwing to your camera. I've used a logitech C615 webcam which has tilt, up/down adjustment so you can get the required angle.
There are 4 slots on the bracket which can be used to feed a cable tie or two through to cable manage any excess wire on your camera. My printed versions i've photoed currently use a slot that is too small but the stl file has an increased slot.
I've included a STL for the tri-pod screw which i am currently using on my build but a metal screw may be more suitable.
Printed on Prusa mk2s, 0.35 layer height and 20% infill.
| Date published | 14/08/2017 |
| Technologie | FDM |
| Schwierigkeitsgrad | Very Easy |
| Support Free | YES |