Seej Starter Set
Seej Starter Set
Published 2014-04-11T19:18:45+00:00
Seej is an Open-Source tabletop wargame based around 3D printing. This archive contains almost everything you need to start playing Seej. You'll need to supply your own pennies and elastic bands. The recent proliferation of inexpensive filament printers with smaller build platforms requires the advent of a smaller Seej engine, so I've added the Marshmallow Mangonel to the kit. The classic catapult gets improvements inspired by community feedback, too. It's all compatible with older prints, and is much, much more accurate. The dawn of the hobbyist resin printer is upon us, so the set includes a one-piece flag and a fancy voronoi bloxen you can use to show off your printer's capabilities. Rules for Seej are at http://www.s33j.net Keep it friendly. Show no mercy.
The Zheng3 Penny Catapult!
Construction is snap-together, but a little super glue may be helpful in keeping the catapult stable during pitched battles. Assembly tips at http://zheng3.com/penny-catapult/
Print the following models once:
* arm.stl
* crossbar.stl
* atlas.stl
Print two of the following:
* side_brace.stl
* winding_key.stl
* strut.stl
print four of the following:
* footing.stl
Penny not included!
Date published | 11/04/2014 |
Dimensionen | 175 X 115 X 75 mm |
Schwierigkeitsgrad | Medium |