Simple Knife Design
3,502
views
61
downloads
1
collection
0 comments
Loading comments... 
Simple Knife Design
3D
Published 2015-04-14T21:26:00+00:00
10
0
Add to Collection
Description
This project started as a speed excersize but later modified to be 3d printable. Glue or adhesive will be required to glue the two back pieces and center piece together after attatching the blade. I was unable to apply
either an omega clip or a locking mechanism to keep the blade locked. The knife comes in a few parts and should already be sized appropriately; blade, center piece, back piece 01 and back piece 02. Tested in Cura with no supports if printed flat sides down.
Printing Details
Print at 0.2 mm layer height, with 10% infill. This uses 4 g of filament and takes 1 hour and 11 minutes.
Technical Information
| Date published | 14/04/2015 |
| Benoetigte Zeit | 71 - 81 Minuten |
| Menge an Filament | 4 g |
| Dimensionen | multiple parts |
| Schwierigkeitsgrad | Easy |
More Information
Object Parts