Spirit Rover Path
Spirit Rover Path
3D
Published 2017-03-09T16:23:15+00:00
Author/Origin: Richard Kim
Relevant Mission: Robotic Mars Exploration
Spirit drove 4.8 miles (7.73 kilometers), more than 12 times the goal set for the mission. The drives crossed a plain to reach a distant range of hills that appeared as mere bumps on the horizon from the landing site; climbed slopes up to 30 degrees as Spirit became the first robot to summit a hill on another planet; and covered more than half a mile (nearly a kilometer) after Spirit's right-front wheel became immobile in 2006. The rover returned more than 124,000 images. It ground the surfaces off 15 rock targets and scoured 92 targets with a brush to prepare the targets for inspection with spectrometers and a microscopic imager.
Easy print, this 3D print don't need supports, scaled in half to print. Printed by https://www.myminifactory.com/users/EzequielR 3D printing Services.
| Date published | 09/03/2017 |
| Benoetigte Zeit | 160 - 180 Minuten |
| Menge an Filament | 100 grams |
| Dimensionen | 304mm x 16mm x 304mm |
| Technologie | FDM |
| Schwierigkeitsgrad | Medium |
| Support Free | YES |
