0.1mm layer height, 11cm tall. Originally printed in white PLA, then a coat of matte black spray and finally, dry brush silver too highlight detail.

Amazing model, thank you!

Printed at 50% scale and .06mm layer.

How to add color？

Awesome model!

50mm, printed at .05mm resin phrozen grey

What a nice print! Completely without support.

;)

Creality Ender 3, 0.12lh, 60mm/sec 15cm overall height

Creality Ender-3 0.2mm nozzle @ 0.08mm layers Scaled to 50%

At 15nm, 60m/s and 60% scale it came out nice. Just some issues with overhangs, corners and moire.

Simply amazing ! Great job ! I tried to print it without support, but I had poor quality on the bottom... can you give me some advice?

This is my biggest item in print time and painting/finishing time. Print with resolution of 0.125 with 10% infill, I used support for the left ear, under the neath and for the neck with 60mm/s of speed. The print came out awesome after 38 hours of printing! The sanding process with this resolution was so simple, after primer filler I started to paint with spray and then adding sking tones with brushes and subtle details (such the drop of blood made by IronMan), painting the eyeswas the most difficult challenge for me, over 1 hour and half but I think they came out great. Thank you so much for this Design David. Hope the community appriaced my finish version. You can follow me on instagram for all the process. Thank you

I added in the community Prints many photos of my version painted and original print but I want to thank you here in comments for this design. My favourite item of my collection. Awesome. I used manual supports in some points to not risk the over 38 hours of print ^_^ .

Printed on a Qidi X-One2

Thanks for creating this model! I enjoyed printing and painting it.

Printed in Bronzefill and then post processed.

Here is the final painted version. I tried the rub and buff and it didn't come out right for me so I went and redid it in a pewter look.

Printed on the Form2 (almost max size) Painted with acrylics.

here is an update on the first piece Edit: 18 hours later and the back of the head is finished.

Fantastic model! Loved painting this. Still new to painting but this model was greatly detailed and I think it turned out great. Printed at .2mm with Solutech Ultra PLA in purple.

0.02mm PLA filoalfa black. todo un placer y un lujo poder imprimir y pintar una figura así.

a pleasure to print and then obviously to paint, great finishes and great work of the creator. I have printed it in PLA nígris of philoalpha at 0.02mm with 9% filling at a size of 15 cm. MANY THANKS TO THE CREATOR.

Excelent file. It's made after 18hs with PLA "Stone" By PrintALot. 0.2mm layer, 40mm/s. What treatment did you do on your model?

Printed in silver pla at 200micron, 10% infill and 1mm wall. Supports only on the chin and bottom front.

Printed On Alfawise U20 10 Hours

Color changing PLA (pink and purple) on Ender 3, 100% scale. 5% infill 2 perimeters 0.2mm layer height 23h print Support only under belly

Printed on Prusa at 200mm tall. .12 layer height, 10% infill with MakerGeek Dragon Metallic PLA. Took 14 hours but was well worth it. Great model!

Well, this is awkward....Very unsure what actually went wrong - printing again tonight. Your STLs are awesome man, keep up the good work! I call him sledgehead Thanos.

15cm tall, 0.10 height, marble filament, 22h :) insanely nice. Thank you

Printed on FFCP, 0.14mm layers, 50% scale. Painted quickly by priming with glossy black and dry brushing with Vallejo's Gun Metal paint. Excellent model, prints flawlessly while having lots of detail.

Let me introduce you the Thanos twins :) Thanks for the amazing model! Painted and printed on 50% scaling

Thanos my boy! Best Marvel villain yet!

Great model. Printed in 3D Fillies gold, and weathered with a black water acrylic paint

Scaled down to 40% of original to fit on the mini V2

Silk copper pla

Printed on Geeetech A10 (Ender 3 Clone) at 80% scale. Im quite satisfied :-D

Hecho, gracias

AWESOME FILE!!! Congratulations, your files are the best. Also printed Deadpool and I'm looking forward to painting both. This one came out really good.

Printed at .15lh, 220mm tall, with a .4mm nozzle on my voron v2.1, about 17 hours total

Great job dude, im printing all your models And also doing some timelapses https://www.youtube.com/watch?v=UBuRv49gO1A

50% scale. Very nice model!

Awesome model, 20 hour print. Too bad Ender 3 started under extruding at the end (in the middle of the night) and poor Thanos got a really brittle skull.

Thanks David. A bit trucanted to fit on m'y printer bed. 0% infill, 25cm tall, 20hrs printing

thanks for this great model. I hope there are more Marvel figures

My printer has 200x200x200 bed dimension and I dint print it downscaled (loose some details...) then I cutted off the base and printed the last in original scale. Aceton vapor > primer > acrylic tint > varnish

Printed at 0.1mm and hand painted

0.12mm layer height thanks for this awesome model !!

Thanks for this amazing model. Height of 160mm, 0.2 without supports... Now time for painting! Any recommendation painting PLA?

Thanks for the model! Printed in Silk Silver. Really nice print, and it made for a fantastic time lapse! https://youtu.be/RAOPBVheXf4

Thanks for the awesome model! I was a perfect model to paint.

Just made this for my recent giveaway on my YouTube channel. Awesome design! https://www.youtube.com/watch?v=K_THBWJ7-JU

Finally painted !

Loved this model thanks for the great design.

Great models

Great job

Very Old wood filament. about 21cm of height. Post processing with sand paper and come lighter flames :D

Printed at 0.16mm on Colido3d Purple with 1.76mm walls and 10% infill

0.06mm 1.2mm wall thickness Support

Creality CR-10S using S3D basic settings Nozzle: 200 (changed from 210) Bed: 65 (changed from 60) Adhesion: Glass bed, no glue Material: PLA (Hatchbox brand) Color: White

Came out very nice with polyalchemy nightshade

Slicer Cura Metallic paint MOTIP Layer height 0.1 PLA E-sun Black 1.75 from hobbyking

Lovely model

Eh terminado la pintura, espero este bien :) Gracias por excelente modelo!

Este es el busto pintado por mi, muchas gracias por el diseño, es excelente

Thank you, David! Here is the Thanos I paint ;-) around 25 cm

You are awesome!

Printed in Marble Jet Pla 1.75mm from Filament-PM Layer height - 0.15mm, Total print height 250mm, Print time - 25hrs

Thank you for the great design. Printed in Pla 1.75mm/Layer height 0.18mm/Infill 10%/print height 190mm/14hrs printing

220/60 30mm/s PLA sunlu :) thx for the stl!

Another great model - printed in lead up to Endgame. No supports, and just some little overhangs on chin, 100% size in 3DFillies gold PLA, and then painted and wiped back with kids acrylic black

Printed at 0.12mm with cura tree supports. It's a great likeness and will find an imposing place on my shelf of busts.

Thank you so much for the amazing designs! Just finished my thanos today with no supports and stock fan.

From about 3 cm of height, nozzle got clogged. I noticed it when i was almost finished. We (Me ad my wife, who painted it) decided to finished it anyway. So it is result. From far, it looks great ;)

10 cm tall, 0.05mm layer height, 0.4mm nozzle, no supports.

Printed without support. Filament 3D Jake Satin Purple

love this model, thanks

Thank you for great design.Pla 1.75mmLayer height 0.2mmInfill 20%print height normal 260mm 28hrs 47 mins printing

My one, painted as commission work

Awesome bust. Came out great.

0.4mm nozzle / 0.2mm layer height Stronghero3D Metallic Grey PLA

Thanos printed on a resin printer and enhanced with "Rub N Buff" wax

Fantastic model as always. Love that it needs no support.

Excellent model. Scaled to 150mm height PLA 0.4 nozzle 0.1 layer height

Next one I will have to try smaller layers and a touch of sanding. I ran this one at 0.24 to see if I could hide the layers under lots of paint coats lol...Pretty proud of it considering it's my first go at this technique. I think it could have gone a lot worse lol.

1:16 scale (16%) Monocure Rapid Grey

Lo que más me a costado es pintar los ojos pero contento con el resultado, un busto increíble muchas gracias por el stl

Very nice model... Great detail :) Airbrushed and painted - was one of my first attempts, happy with it except for the eyes. He looks like he has had too much caffine lol..

0.15 pla fillamentum wizar's voodoo. 12 cm

.15 layer 50 mm/s 5% infill No supports Silky bronze rainbow filament. 6.5 hrs.

150mms - 0,1 layer Printed on the new V-Baby Engineered CoreXY

Imprimé sur MK3 MAKER de SmartCub3D. 100 microns.

Beautiful model! Printed in purple pla .12 mm layer heights on an Ender 3 with little modification.

It is a nice model. Output to ender5 without support. It's best. : D https://youtu.be/EcqxRwr9mTg

Printer: Geeetech A30 Marble PLA

Realized afterwards that I didn't get the color scheme correct as I wasn't using a reference image. I don't mind one bit as I was having a blast painting all that gold.

Thanks in Grey ABS

Thanos in Grey ABS

175mm height @ 0.12mm, 3D Fillies Gold PLA+ -- glorious! Stock Ender 3, no supports (how it handled the 70deg+ overhang I'm not sure! wow) Awesome model!

I want to print a larger ones just so I can do details in the eyes

0.4 nozzle 1.2 layer 18h 21min of printing 175mm height Polyalchemy Elixir Brass PLA

This look sooo good! I used a TianFour T280 to print it as a height of 150mm and it turned out great.

Purple PLA and some Metallic Pens for effect

Looks amazing, thanks for sharing your model. How did you achieve the metal look?

Just finished this one. Thank you so much for this model. The print sort of failed for me. Issues due to it being cold and layer adhesion due to ambient temperature. Issues with layer under the chin, nose and left eye. 60% Scaled Sliced via Cura 4.4.1 Hatchbox 3D PLA 1.75mm Ender 3 Pro PLA 200C / Build Plate 60C .12 Layer Height .8 Line Width 5% Infill No Supports Jerk Speed 50% Retraction Speed 40mm/s Speed 50mm/s

Impreso a 0.12, pintado con acrílico y pincel.

heres my effort printed with just Silver Amazon basics PLA at standard quality on an Ender 3 Pro

Tevo Tarantula ProVideo: youtu.be/D8RbNNkF9HM 0,1 mm layer height 0% infill 6 wall no support 55 mm/ sec print speed Gembird Marble PLA: 215 C / 45 C bed Scaled to 240 mm height, print time 30h

.12 Layer Height, Purple Silk PLA, 217C HE, 61C Bed.

Hi ! I would like to thank you for this incredible model ! And also share my experience. Overall it looks really good I’m truly happy how this thanos turns out, I used support for this one , a saw a lot of comments saying that they didn’t used support but as it is a “big” project I didn’t wanted to risk it all . I made it with my ender 3 pro and cura 4.5 •infill 5% •quality 0.12mm •wall thickness 1mm This are the settings I used but I would definitely change it for my next project as this one turns out too light and you can see through it.

Hi ! I would like to thank you for this incredible model ! And also share my experience. Overall it looks really good I’m truly happy how this thanos turns out, I used support for this one , a saw a lot of comments saying that they didn’t used support but as it is a “big” project I didn’t wanted to risk it all . I made it with my ender 3 pro and cura 4.5 •infill 5% •quality 0.12mm •wall thickness 1mm This are the settings I used but I would definitely change it for my next project as this one turns out too light and you can see through it.

Pla = Purple Silk Geetech Layers = 0,06 mm Speed = 40 mm/s Infill = 5 % Support = No Nice Model Thanks!

This print made me go and watch the whole MCU on Disney+ just so I can get to see Thanos click he's fingers. Thanks for an amazing Model, I even made a timelapse for it http://youtu.be/iDfGldcrNVs

Your models are amazing! Thanks for this one! I did a black base coat and then airbrushed some Vallejo silver metallic paint over it to try and mimic the original photos posted by the creator.

Awesome model.

Really cool model to work with!

resin wanhao gray height 100 mm

It’s perfect! Thanx sir!!!

Our version

This was a really cool bust to paint, the detail in the model is crazy. Thanks heaps!

Printed at 50mm high and 0.025 layer height as a tester for my Anycubic Mono. Have printed couple more of the busts so will add those to their respective pages too

Thanks for this awesome model :) I love it ! I share with you my printed and painted Thanos :) You can watch my video to know how I painted it: https://www.youtube.com/watch?v=NSiy5j8wYYI&t=351s

My first bust!

Incroyable fichier ! Merci !!! Je l'ai imprimé en PLA Marbre :) Si vous voulez découvrir mes impressions, vous pouvez aller voir mon Insta : guigeek_

Si vous voulez découvrir mes impressions, vous pouvez aller voir mon Insta : guigeek_

Printed on Longer3d LK4 Pro with Klipper using Prusament PLA

95mm de haut 0.15mm infill 0%

Minhas primeiras tentativas de esculpir utilizando o 4 eixo da CNC Caseira. Material: Madeira Caxeta e Roxinho (brazilian wood)

Awesome print. One of the best supervillians .. very good pose

Had a lot of fun with this one, thx for creating it! And Sharing!!

0.2mm Layer height, Prusa MK3S, Sunlu PLA + Filament, 17hrs. These models are amazing and it shows in the prints :D.