The Little Prince - 'Drawing Number Two'
The Little Prince - 'Drawing Number Two'
Published 2015-01-19T13:17:03+00:00
A support-free printable model of a snake consuming an elephant; inspired by the watercolour illustations from the French book Le Petit Prince (1943).
'My drawing was not a picture of a hat. It was a picture of a boa constrictor digesting an elephant. But since the grown-ups were not able to understand it, I made another drawing: I drew the inside of the boa constrictor, so that the grown-ups could see it clearly. They always need to have things explained. My Drawing Number Two looking like this.....' - The Little Prince, by Antoine De Saint-Exupery.
The initial concept behind transforming the illustations from 2D to 3D is to create resources to improve the experience of literature for the blind and partially sighted through rendering illustrations and graphics from well-known fiction into tactile objects and reliefs. Stay tuned :)
_________________________________________________________________________
If you purchase this object through the MyMiniFactory Store please note:
-
This product will come unassembled and unpainted when you buy it. We encourage you to be creative, personalize it as you wish. Express your awesomeness and share a picture of the final result with us!
-
Unless you have a particular request, the colour of your print will be chosen at random and will be printed in either ABS or PLA filament.
-
Delivery time will be between 1 and 4 weeks from the moment you order the object. This is dependent on your location and the length of time the object takes to print.
-
Email info@myminifactory.com if you would like any further information or if you have any special requests.
-
Sometimes orders will be printed live on MyMiniFactory TV - check it out here.
_________________________________________________________________________
Recommended print settings (as pictured) 0.20mm layer height 20% infill. No support. Printed at full scale 18cm length from snakes head to tip of tail, 33g of filament and 2 hour 50 minutes print time. (Reduce infill for quicker print time).
Date published | 19/01/2015 |
Benoetigte Zeit | 120 - 170 Minuten |
Menge an Filament | 33g |
Dimensionen | 180 x 37 x 48 |
Schwierigkeitsgrad | Very Easy |
Support Free | YES |
Made on the Printrbot.