Tokenster (D&D Monster Token) + Tocounter (D&D Token counter)
Tokenster (D&D Monster Token) + Tocounter (D&D Token counter)
3D
Published 2018-06-20T14:22:15+00:00
TOKENSTER or Monster Token for D&D is a easy to print (no support) and low PLA use Token for Monsters (or whatever you want) in Dungeons and Dragons (or any other tabletop game)
25mm base for 28mm Creatures (MEDIUM)
50mm base for BIG Creatures
75mm base for HUGE Creatures
Things to do:
Print the BASE and print A LOT of FACE. You can change the FACE over the BASE, so you could have just 10 BASE and 100 FACE.
Print the monster/object/face/whateveryouwant and cut it in the right dimension (I put a Gimp file (10x15 BASE.xcf) with 10x15cm picture with guide and marker [10x15 is the cheapest format to print everywhere]).
Glue the pictures over the FACE (you could use biadhesive, it's actually easy to use) and that's it.
If you are a Master:
You can Create everything you want to place in your squared terrain.
If you are a Player:
You can Create your own PG. Just print/draw/photo and put it on the FACE
I know the FACE print is very Thin, but I don't want to use a lot of PLA for this thing. When you Glue the picture the Token will be hard enough
EDIT 2018 JUNE 12
Add the TOCOUNTER, the easy to print Token Counter for Tokenster.
Add the Tokenster 50mm for LARGE creatures (BASE + FACE)
Add the Tokenster 75mm for HUGE creatures (Only BASE, for FACE you could use the 50mm FACE)
You have a lot of monster of the same type? just put the Tocounter over the Tokenster.
0.2
NO SUPPORT
| Date published | 20/06/2018 |
| Support Free | YES |