20mm_Cube_for_Calibration
8,940
visitas
1,852
descargas
11
colecciones
0 comentarios
Cargando comentarios...
20mm_Cube_for_Calibration
3D
Published 2017-11-24T10:53:37+00:00
143
0
Add to Collection
Descripción
This is a calibration cube designed in OpenSCAD. The letters should be 12mm tall and 11mm wide if when measured in their correct orientation. The cube itself as the title suggests should be 20mm in each dimension.
Do remember that if you're printing with a first layer height less than 100% your measurement in z should be - layer height - (layer height * (first layer % /100)) shorter than 20mm.
Also note that if you print this in layer heights which aren't exact divisions of 1mm then the letter heights may not be exact!
The letters should appear centrally on the face they are printed on (both horizontally and vertically!)
Detalles de impresión
0.2mm layer height
10-20% should be fine
Información técnica
Date published | 24/11/2017 |
Sin apoyo | YES |
Más información
Archivos