3030 T-Nut Clip
3,593
visitas
155
descargas
0 comentarios
Cargando comentarios...
3030 T-Nut Clip
3D
Published 2019-09-10T15:47:06+00:00
23
0
Add to Collection
Descripción
This is a quick and simple clip for holding t-nuts in place in 3030 extrusion that I made as an assembly aid. This was designed for and tested in Misumi HFS6-3030 extrusion. Simply press the clips into the slot where needed or slide in from an end. They should be a snug fit but move without too much effort.
Licencia
Detalles de impresión
Most of the clip is only two layers thick (if printed with a typical .4 mm nozzle) You can print it solid or just one layer thick if you want. I've only made with PETG, but should work with PLA or ABS.
Información técnica
Date published | 10/09/2019 |
Sin apoyo | YES |
Más información
Archivos