AEWEEN01 - Halloween Graveyard
$10.00 AEWEEN01 - Halloween Graveyard
3D
Published 2021-04-17T13:50:18+00:00
Is it that time of year already? Thrill your players with this Spooktacular set of 3D-printable terrain, including a crypt, numerous graves and gravestones, and a pumpkin patch -- including the Great Pumpkin himself! This set includes more than 40 STLs in all, compatible with all DragonbiteTM terrain.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 17/04/2021 |
| Precio | $10.00 |
| Sin apoyo | YES |
I used this set for the Halloween gamenight.