Bowden Extruder Idler/Arm
Bowden Extruder Idler/Arm
Published 2017-02-20T12:50:17+00:00
While building my printer (Anycubic K1 - Kossel Mini) I accidentally broke the arm/idler of the extruder. This was my first ever functional design and printing a replacement like this was of course quite a hack-job. As this model is rather small but still somewhat complicated it is great as a test-print for new settings (as you can see in one of the pictures).
Bearing: 608ZZ
Prints as-is without any support structures.
It is a direct replacement for the idler this printer shipped with and the model is as close to the original one as possible. It is always good to have a replacement part at hand, so you better print this before it fails! (Safes you from many headaches :D )
Date published | 20/02/2017 |
¿Cuándo tiempo lleva? | 8 - 10 minutos |
Cantidad de filamento | roughly 3 grams |
Dimensiones | 45mm x 12mm x 11mm (XYZ) |
Tecnología | FDM |
Sin apoyo | YES |