CoinTop: Dollar roughcut
4,323
visitas
112
descargas
3
colecciones
0 comentarios
Cargando comentarios... 
CoinTop: Dollar roughcut
3D
Published 2016-01-29T13:23:58+00:00
5
0
Add to Collection
Descripción
This is my first coin top, the dollar rough cut.
Its a simple little top that uses four $0.25USD coins (quarters) as its mass, thou some other coins may also work with a bit of scalling of the object. It is also support free, but you may need a brim if you have poor bed adhesion. Each good spin lasts about 2min. spin it on a concave mirror for best results.
My print settings: using .4mm nozzel on an ultimaker2
layer height: 0.1mm, thou the finner the smoother it will be.
shell thickness: 0.8mm
infill: 25%
Información técnica
| Date published | 29/01/2016 |
| ¿Cuándo tiempo lleva? | - 63 minutos |
| Cantidad de filamento | .08grams |
| Dimensiones | 29.5mm x 29.5mm x 45.5mm |
| Sin apoyo | YES |
Más información
Archivos