Computer Cable Chase with Speaker Control Cradle
Computer Cable Chase with Speaker Control Cradle
3D
Published 2018-09-20T03:12:17+00:00
Custom Cable Chase
This is a purpose built cable chase to cleanly route cables from my wall mounted monitors and speakers behind my desk. The chase also has a mount for my Logitech speaker volume control freeing valuable desk space for more important things.
I realize this model will not be of use to many, but it may serve as inspiration for a project you do have in mind.
For me this was a good learning experience as I am still new to Fusion360 and at the time I made this it was only my 4th and most complex project I created.
The project came out perfectly and works better than I hoped for.
Print Time: 2 hours 19 minutes
Filament: 3D SolutTech PLA - Peach (a.k.a. Tan)
Bed Temp: 60c
Extruder Temp: 215c
Layer Height: 0.3mm
Top/Bottom Layers: 3
Perimeter Shells: 3
Infill: 20%
Infill Pattern: Rectilinear
Filament Length: 23300.3mm
Plastic Weight: 70.05g
Material Cost: $3.22
| Date published | 20/09/2018 |
| ¿Cuándo tiempo lleva? | 90 - 140 minutos |
| Cantidad de filamento | 70.05 |
