Coolant Cap Wrench for Ford, Lincoln, Mazda, Volvo, Land Rover
Coolant Cap Wrench for Ford, Lincoln, Mazda, Volvo, Land Rover
3D
Published 2019-04-29T17:24:52+00:00
I made this for our 2014 Ford Escape's coolant reservoir cap. It can be a bit hard to turn and is tucked in a somewhat awkward spot and this tool helps a lot.
It should fit many newer Ford models. I think it may also fit some Mazda, Volvo, Land Rover as I saw a tools for sale online that supposedly work on all these brands. I can only confirm it works on my Ford. If you find it works on other vehicles, let me know and I can add that information.
It fits easily with just a little tolerance. I added a 3/8" square drive hole on the handle for a socket wrench just in case you need a little extra torque, which I doubt you will. Mostly just an extra hole to hang it with.
If your cap is just under 60mm in diameter at the outside of the 6 ribs and is ~55 mm diameter at their base, then this should work for you.
Flip it text side down.
I printed mine out of PETG with:
.2mm layers
3 perimeters (.4mm nozzle)
6 top and bottom layers
15% rect infill
It seems plenty strong enough.
| Date published | 29/04/2019 |
| Sin apoyo | YES |
