Corner Drawers
Corner Drawers
3D
Published 2017-03-21T13:24:13+00:00
'Corner Drawers' are just that... small sets of drawers made to go in a corner. This provides a simple solution to put corner spaces to good use. The design includes upper and lower runners acting on the drawers so, regardless of the triangular shape, the drawers slide straight in / out without skewing sideways.
You can store all sorts of small things in your corner drawers including nuts / bolts / screws, stationary items like paper clips and staples, rubber bands, twist ties, electrical components, jewellery, small toys, parts... and lots more.
Six frame options have been provided so you can print the Corner Drawer set to suit your needs. The differences are the number of drawers and the height of those drawers. The drawer depths differ as follows:
Small (S): 25mm tall
Medium (M): 37.5mm tall
Large (L): 50mm tall
The frame files are named according to the drawers that will fit into them. For example, the SML.stl frame takes one of each of the above drawers. The ML.stl file takes one M and one L drawer... and so on. This provides a range to suit different needs.
The clearances applied should allow the drawers to slide in and out freely. Even smoother sliding can be achieved by spraying some silicone lubricant (or similar) onto the frame rails at the bottom of each drawer slot and in the slots under the drawers themselves. These rails and slots have been designed in so the drawers slide straight in and out regardless of having no side support to stop them from skewing sideways.
Handy for your own use but equally good as a gift. Print in your own choice of colour to make them fit the space. They will look great in any colour combination including subtle / all one colour, classy / neutral colour frame with drawers a different colour or fun / bright with all parts in different colours. Have fun creating your own unique set.
Please refer to the images and print settings for additional information... and post images of your Corner Drawers in use for others to see.
Note: If you like this check out the rest of my practical and fun designs.
Easy prints with PLA. You should not need to use supports for PLA prints provided your machine has a filament fan. This is necessary to make the drawer handles print well.
Just slide your drawers into the frame....
| Date published | 21/03/2017 |
| Tecnología | FDM |