CR-10 Fan Mod - Airflow Optimization
7,496
visitas
676
descargas
4
colecciones
1 comentarios
Cargando comentarios... 
CR-10 Fan Mod - Airflow Optimization
3D
Published 2018-03-05T11:07:37+00:00
95
1
Add to Collection
Descripción
This is an easy to mount cooling mod for the creality CR-10.
This mod directs the fan air flow directly to the tip of the nozzle without being to big or obstructive. If you are looking for the best print quality this is definitely a must for your CR-10.
To mount it you just need to remove the two screws holding the default part in place. Remove the default part and insert the modded part.
Hope you enjoy it! And If you do make sure to like this project! Thank you!
Detalles de impresión
Layer Height: 0.2 mm
Infil: 10%
I also recommend using a brim to avoid warping.
Don't use support material.
Información técnica
| Date published | 05/03/2018 |
| ¿Cuándo tiempo lleva? | 20 - 25 minutos |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |
Más información
Archivos
