Crank Extruder Knob Creality Ender 3 / Ender 3 Pro / Cr-10
8,575
visitas
1,326
descargas
18
colecciones
0 comentarios
Cargando comentarios...
Crank Extruder Knob Creality Ender 3 / Ender 3 Pro / Cr-10
3D
Published 2019-09-18T19:40:12+00:00
328
0
Add to Collection
Descripción
A simple wheel with a rolling pin for extruders with 5mm shafts.
For fast filament charge and discharge in bowden setup (disabling stepper motors)!
You wil need an M3 bolt to secure the washer.
Licencia
Detalles de impresión
layer 0.2
width 0.4
Infill: 50%
3+ walls.
If you have tolerance problem you can upscale the wheel or downscale the pin by 0.5-2% in X and Y directions (not Z).
To push the wheel in the shaft you may use GENTLY a small clamp.
Información técnica
Date published | 18/09/2019 |
¿Cuándo tiempo lleva? | 30 - 60 minutos |
Más información
Archivos