Destiny Thorn Handle Split
8,002
visitas
719
descargas
4
colecciones
2 comentarios
Cargando comentarios...
Destiny Thorn Handle Split
3D
Published 2015-02-18T19:53:14+00:00
27
2
Add to Collection
Descripción
This is a modified version of the handle from Kriby Downey's excellent Thorn Hand Cannon model, from the game Destiny. I had problems printing the handle because of the complex geometry and overhangs. Supports just didn't do the trick, so I split the handle along the long axis, allowing it to be printed in halves. Once the halves are glued together they still jigsaw into the remainder of the model as intended. I hope this modification helps folks who are having the same problem that I did!
Detalles de impresión
Print at 0.2 mm layer height, with 10% infill. This uses 49 g of filament and takes 248 minutes.
Información técnica
Date published | 18/02/2015 |
¿Cuándo tiempo lleva? | 248 - 258 minutos |
Cantidad de filamento | 49 g |
Dimensiones | 86 x 104 x 50 mm |
Complejidad | Muy fácil |
Más información
Archivos