DJI "PHANTOM 3 CAMERA VIBRATION ABSORBING BOARD"
4,726
visitas
295
descargas
2 comentarios
Cargando comentarios...
DJI "PHANTOM 3 CAMERA VIBRATION ABSORBING BOARD"
3D
Published 2018-01-19T10:05:54+00:00
11
2
Add to Collection
Descripción
This the replacememt part for the DJI PHANTOM 3 Gimbal mounting plate. I built it for a friend who's drone crashed. it is modeled based on measurements from the broken part and the actual drone. I have done both a solid and a 15% Hex infill on this part and i have listed estimated weights based on the the model volume in the images. i have not weighed the physical sample as i do not have a scale that measures such a small amount. if any one who prints these parts is able to verify my estimates please comment, it will be greatly apprecitated.
Detalles de impresión
No brim required
Información técnica
Date published | 19/01/2018 |
¿Cuándo tiempo lleva? | 59 - 63 minutos |
Cantidad de filamento | 3.44 Meters, 8.703 cm³, .53 in³ |
Dimensiones | 3.43" x 3.43" x 0.135" (87.12mm x 87.12mm x 3.43mm |
Tecnología | FDM |
Complejidad | Fácil |
Más información
Archivos
Printed without support and have some issues on the bottom, but we will see how it fits.