Dragon Egg Boxes
Dragon Egg Boxes
3D
Published 2017-08-23T14:41:21+00:00
Hi!
This one is a generator for some kind of 'Dragon/Alien Eggs' that can be used as a container for small pieces.
This is one of many experiments based in Phyllotaxis algorithms. Eventually i'll publish one or two more interesting things related to this.
This is a customizable figure. Play with the Customizer and find a nice one.
Every customization produces 4 files:
- Complete sphere
- Upper semisphere
- Lower semisphere
- Screw to join the semispheres
Print the two semispheres and the screw and you'll get the container.
Also the semispheres are great for a planter.
Use the complete sphere as you wish. You can throw a dragon inside while printing and get a real dragon egg. Wuhuu!
I encourage you to download and modify the OpenScad code. The Customizer made for this one just modify some parameters but dealing with code you can get many variations.
This one uses the Poor Mans Screw Library (sigthly modificated) for the screw and nuts used. ( http://www.thingiverse.com/thing:8796 )
Also used this nice dragon of bs3: http://www.thingiverse.com/thing:1469139 in pictures.
Hope you enjoy this one!
Have fun!
Printer : BQ Prusa i3 Hephestos
Rafts : No
Notes :
Tested with PLA
Supports: You may need supports in some figures with big spikes. also the 'top' of inner sphere can make 'overhanging' issues and you may want some supports here. I usually cut and clean the overhangs.
Infill not needed but recomended as 'inner supports' for the figure. a 15-25% infill must be enough. I print some 'hollow' figures and may appear small holes on roofs
3 top layers it's great to avoid small holes on roofs
2 shells ant 2 bottom layers will be enough
Tested with resolutions between 0.3mms and 0.15mms (for big and smaller figures)
IMPORTANT!! Scale down by 1%-2% the XY axis (not Z) of screw and you'll get an easy and smooth screw without need of sanding
In Cura slicer sofware there's an option called 'Horizontal expansion'. Set this to -0.2 or -0.3 and print screw at same scale than semispheres.
| Date published | 23/08/2017 |
| Tecnología | FDM |
| Complejidad | Medio |