Duplicator i3 e3d v6 adapter
Duplicator i3 e3d v6 adapter
3D
Published 2017-05-08T10:12:57+00:00
This adapter is for the e3d v6 to fit onto a Wanhao Duplicator i3, Cocoon Create, Monoprice Maker Select. It should work on v1, v2 and v2.1
Completely rebuilt but inspired by Piggyjj's model.
This one includes 4 holes for the e3d clamp, i found the original design was making the hotend tilt a bit to the side. Also, it includes 3 prongs to use for the belts instead of the original screw/bolt system. The bolts have problems flexing when the belt is tightened and pulling on them, which works in the metal design, but struggles in the plastic design.
Two versions included, one for a setup with two top x carriages, and one designed for one top x carraige.
I would suggest using this in combination with modified bearing holders, or printed versions to fix the belt rub.
Will require 2x m3 25mm bolts.
The standard long black hex head m3 bolts used in the mk10 extruder can be used in the bottom two holes in the clamp.
With ptfe tube running all the way up to the bottom of the mk10, I have successfully printed ninjaflex (tpu) with this setup.
| Date published | 08/05/2017 |
| Tecnología | FDM |
| Complejidad | Fácil |