Expandable Equal Space Divider
Expandable Equal Space Divider
Published 2019-01-26T20:05:20+00:00
This is a tool used to equally divide a space into as many points as necessary, you would only need to print more parts to make more points to divide.
I have updated the files and created a version 2
Changes for V2
The dividers can go further apart now
Tighter tolerances
Screws used for tighter fit
Same middle piece
There is a small lip on the tip that can be used to press against the work to get more accuracy
the curve next to the tip was replaced with a 45 degree edge.
included 3d printable washers but any will do
https://youtu.be/elFIMQH9e6s
Make sure to assemble from the bottom. You can actually assemble all the bottom and middle parts and then add the tops.
For every top part you want you need the same amount of bottom and middle parts plus 1.
For example you want 5 tops you need 6 middle and 6 bottom.
For v2 you will need m3 screws multiple sizes will work with and without nuts in the back.
Date published | 26/01/2019 |
Sin apoyo | YES |