Fully Articulated Artist's Mannequin
17,782
visitas
2,319
descargas
16
colecciones
3 comentarios
Cargando comentarios...
Fully Articulated Artist's Mannequin
3D
Published 2018-01-08T14:51:46+00:00
262
3
Add to Collection
Descripción
Drawing is something i love doing, especially cartoon characters. As such, I decided to model and artistry mannequin to help with poses and form. Sure, I could have gone to the store and bought a mannequine, but I'm sure many who own 3d printers will agree that that just isn't enough fun. And so I decided to share it here for others to make there own! With flat areas to optimize build plate adhesion and very minimal use of support material, It was made to be extremely easy to print even with 14 joints and a desktop-friendly size.
If you have any concerns, feel free to leave a comment or contact me through social media. I'll be happy to reply!
Detalles de impresión
- Layer Height: I wouldn't go higher that 0.1mm. Those ball/sockets aren't that big.
- Infill: I printed with 50%, but it really doesn't matter much.
- Material: It should be compatible with most plastics, though I've only tried PLA.
- Number of Parts: 15 (some must be duplicaded and mirrored)
- Supports: For the most part, none. The only parts that do are the thighs.
- Plate Adhesion: 5mm brim
Información técnica
Date published | 08/01/2018 |
¿Cuándo tiempo lleva? | 300 - 500 minutos |
Dimensiones | 150mm height |
Más información
Archivos
Very nice. Very intricate. Had to print a few parts twice, but after that all was good. Hands were easiest to print with "palms" on he printer bed. Printed for my daughter, who will attend art college in the fall.