Furry Dragons Lair - Baby Furry Dragon (Only!)
$6.00 Furry Dragons Lair - Baby Furry Dragon (Only!)
3D
Published 2023-02-21T22:01:10+00:00
This listing is for the Baby Furry Dragon only!
Gladiator Designs 3D and MysticSaige have teamed up to bring you the Baby Furry Dragon and it's Lair.
This furry dragon designed by MysticSaige features a fully articulating mischievous little dragon. They have multiple printing options and were design to print-in-place without needing supports. They are able to sit, stand, and laydown on their own!
The Dragons Lair (not included with purchase) created by Gladiator Designs 3D makes the perfect home for these amazing dragons. It features a print-in-place design that does not require supports to print. Open and close the cave by turning the lever on top. The hallow log on top fits the big Furry Dragon from MysticSaige (not included with purchase) or many fun loving furry babies.
This listing is for the Baby Furry Dragon only!
The Dragons Lair is available for purchase here : https://www.myminifactory.com/object/3d-print-dragons-lair-collaboration-273515
And the Flexy Furry Dragon can be found here : https://www.myminifactory.com/object/3d-print-flexy-furry-dragon-articulated-print-in-place-212428
_______________________
Please feel free to share images of your prints, we would love to see what you do with them! ^_^
_______________________
All my models are for personal use only. You may never redistribute or sell my files in any way.
If you are interested in selling 3D Prints of my models, you may acquire a commercial license through my Tribes or Patreon.
By joining you will also get Three (3) free model releases per month, a welcome package of 20+ models, exclusive models, and a 50% off discount code to MysticSaige MyMiniFactory store! Stop on by and check it out!
Happy Printing!!
Baby Furry Dragon has 3 printing options :
Full body, full body pose 2, and separated version with a movable head. Once printed, you will need to glue the peg into the neck.
Baby dragon has been test printed as low as 75% and as high as 200%. I do not recommend scaling them smaller then that!
They print-in-place and NO supports are needed!
Settings:
- 3+ perimeters (the more the stronger it will be).
- 15%+ infill.
- Have bridge settings enabled.
- Make sure to have good bed adhesion or use a brim/raft.
- Great in PLA! Has NOT been tested for resin printing.
| Date published | 21/02/2023 |
| Precio | $6.00 |
| Sin apoyo | YES |
