hose connector with underground nozzle
3,946
visitas
141
descargas
0 comentarios
Cargando comentarios... 
hose connector with underground nozzle
3D
Published 2017-01-11T10:08:54+00:00
14
0
Add to Collection
Descripción
For watering root system of roses etc. Use a proper rubber O-ring on the adapter.
Detalles de impresión
I printed this in black PET (MadeSolid PET+, 150 micron) as PET was more appropriate for the use. This is a difficult print because of the narrow base and tall height. I needed two prints, the first try broke loose from the bed. I added a brim (3 layers, 6 outlines) to secure it. And even at that there was some difficulty at the top of the spike. As mentioned in my earlier comment the design could benefit from some changes to the horizontal overhangs. If they were angled up 30 to 45 degrees it would make the interior surfaces much neater.
Información técnica
| Date published | 11/01/2017 |
| ¿Cuándo tiempo lleva? | 200 - 240 minutos |
| Cantidad de filamento | 23g |
| Dimensiones | 21x21x35, 20x20x140 |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |
Más información
Archivos