Hyundai key holder
3,419
visitas
62
descargas
1
colección
0 comentarios
Cargando comentarios... 
Hyundai key holder
3D
Published 2017-03-13T12:29:29+00:00
2
0
Add to Collection
Descripción
I wanted to utilize the command strips I over ordered to make some 3d printed wall stuff. I decided to make the keys fit into a slot rather than just hang from a peg.
i used the 16lb command strip picture holders that use the hook and loop style connector.
I suggest smoothing the mating surface for the command strip on the bottom of the holder to improve the stick of the strip.
20% infill was sufficent
this one has Hyundi on the key holder.
fits the 3mm x 7.75mm x 41mm key.
same design as my subaru key holder just with hyundi on the holder instead.
Detalles de impresión
infill
Información técnica
| Date published | 13/03/2017 |
| ¿Cuándo tiempo lleva? | 130 - 267 minutos |
| Cantidad de filamento | 20 |
| Dimensiones | 93×92×35 |
| Tecnología | FDM |
Más información
Archivos
