Joels "High Five" Spoolholder
Joels "High Five" Spoolholder
3D
Published 2018-08-03T16:18:21+00:00
My entry for the 3D contest by Joel Telling, aka 3D Printing Nerd.
It's a simple form, but I used some elaborate tricks in Fusion360 to get it using a bit less material. Or maybe there are easier ways to do this :-)
It even has a 'High Five' hand on the front! :-)
Unfortunately, I could not print it myself, because my printer is simply not big enough...
The main curve should not give problems. I used a 45° chamfer to get rid of the sharp edge. With reasonable bridging capabilities of the printer, the spool arm should also work.
The whole object is simple to use: just hang it on on of the top wood shelves, and let the bottom rest against the lower shelf.
@MatterHackers @MyMiniFactory @3DPrintingNerd
ok
| Date published | 03/08/2018 |
| ¿Cuándo tiempo lleva? | 170 - 340 minutos |
| Cantidad de filamento | 22 |
| Dimensiones | 100 169 13 |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |
