Killer Queen Snail God
Killer Queen Snail God
3D
Published 2019-07-22T13:49:24+00:00
If a snail's shell is its house, does that mean the Snail God is carrying its mighty Tabernacle?
The Snail God, aka Shufflepuss, aka The Third Way To Win, aka The Chug Train is finally here to grace your desk with its slimy favor. Printed at the same scale as the rest of the Killer Queen figurines in the shop (1px = 3mm), this turns out to be a big ol' print with plenty of space to store your pens, paint brushes, or cabinet coins up top.
Note: While you can probably plant small succulents or the like in the shell space, I can't guarantee that print interiors are watertight so leakage is possible (though not probable). Also, the standard print does not include the appropriate drainage that most potted plants require.
All Killer Queen items are based on the Killer Queen arcade game developed by the geniuses at Bumblebear Games.
Printed at 0.3mm layer heights. The bridging required for the interior space gets a little stringy at that thickness, and is notably better at 0.2mm.
Print 2x "feelers". The red slug part doesn't require support, and a bit of sagging gives the feelers a tight fit (still needs glue for long term hold).
Do a filament swap at around 3mm on the purple detailing for full color without paint.
| Date published | 22/07/2019 |
| ¿Cuándo tiempo lleva? | 840 - minutos |
| Cantidad de filamento | 140g |
| Sin apoyo | YES |