KS1SOS34 - Treehouse
$4.00 KS1SOS34 - Treehouse
3D
Published 2020-12-30T11:38:41+00:00
This set of 3d printable terrain is another of the core terrain items in the Swamp of Sorrows Kickstarter from Aether Studios. Included in this set is everything you need for an oversized 4x4 inch treehouse in the swamps. Mossy overgrowth and brackish swamp water compliment the reeds and plants of the tile base to match the Scarlettfens swamp terrain. Also included in this set is a moss-covered chimney and a large torch scatter model. In the picture below it is shown with figurines from our Core Miniatures set.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim helpful on small items
| Date published | 30/12/2020 |
| Precio | $4.00 |
| Sin apoyo | YES |
An excellent print from Aether.