Laforge Flash Door
Laforge Flash Door
Published 2017-11-08T14:32:31+00:00
This is a modification to an existing design that was made by MUSICSURF. You can see the original files here: https://www.thingiverse.com/thing:1766420
There are two doors, the one that has two round holes is not changed, go to the original files to download that. The second door that has a rectangular window cut in it for the Laforge display now has a very small square cut out of it in the bottom left. That enables easily access the 6 pin plug to flash the firmware. That door is the one you will find here.
This is not a super easy print only because it requires a lot of support. If you feel comfortable printing support then you can print this door without worries.
Date published | 08/11/2017 |