Mechanical Keycap Remover
5,434
visitas
391
descargas
4
colecciones
3 comentarios
Cargando comentarios... 
Mechanical Keycap Remover
3D
Published 2018-05-03T12:11:50+00:00
36
3
Add to Collection
Descripción
This is a 3D printable keycap remover, specifically designed for Cherry MX keys.
This is a very simple design, which uses two arms attached to a handle piece. The arms are pushed on either side of a key, and the handle is then pulled away from the keyboard to remove the keycap.
This device was designed with Cherry MX keycaps in mind, however it may work on different sized keycaps.
Detalles de impresión
You will need to print:
- 1 Handle
- 2 Arms
The keycap remover in the photo was done using:
- 0.2 mm first layer height
- 0.2 mm layer height
- PLA
- Prusa i3 MK2
Once all the pieces are printed, slide the two arms into the handle piece and the keycap remover is ready for use.
Información técnica
| Date published | 03/05/2018 |
| ¿Cuándo tiempo lleva? | - 30 minutos |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |
Más información
Archivos
