Mida Multi-Tool
Mida Multi-Tool
Published 2016-06-20T13:21:14+00:00
This is a full scale version of Mida Multi-tool. The stock is removable, along with the magazine. Both the led holder and magazine have places for magnets. There are 6 spots for 1/2"x1/8" Disc magnets. 4 Spots for 1"x1/4"x1/8" rectangular magnets. The original file was taken from Destinystlgenerator.com and split up with details added.This was printed on a 10"x10" bed, so some objects may need to be split up in order to print on smaller print beds. Some tolerances are are very tight, depending on your printer some sanding may be necessary. 3mm LED bezels were used to hold the LED lights. You can either melt them into the holes or screw them in.
I am by no means a proffesional at this, so if there are any problems feel free to message me with questions.
Date published | 20/06/2016 |
Dimensiones | 27"x 14"x 2 1/4" |
Tecnología | FDM |