Orbit Vase
Orbit Vase
3D
Published 2019-05-21T10:10:11+00:00
I love swirly math art shapes! This quintuple-armed swirling vase grows organically between two dodecahedrons, though you'd never know it under all that organic smoothness! This is a regular print, not a vase-mode one, but it would be interesting to adapt this to be printable with a single perimeter...
Have fun!
You might also like these free designs!
* Folio Vase: https://www.myminifactory.com/object/3d-print-84927
* Zephyr Vase: https://www.myminifactory.com/object/3d-print-81577
* Cog Bowl: https://www.myminifactory.com/object/3d-print-75430
* Groover Vase: https://www.myminifactory.com/object/3d-print-75113
* Classical Vase: https://www.myminifactory.com/object/3d-print-81753
* Lattice Bowl: https://www.myminifactory.com/object/3d-print-53755
* Blade Vase: https://www.myminifactory.com/object/3d-print-78571
* Gothic Goblet: https://www.myminifactory.com/object/3d-print-73249
* Fan Parabola Vase: https://www.myminifactory.com/object/3d-print-73432
* Clover Vase: https://www.myminifactory.com/object/3d-print-71567
* Chunky Ring Vase: https://www.myminifactory.com/object/3d-print-77170
* Tendril Vase: https://www.myminifactory.com/object/3d-print-51873
* Jigsaw Vase: https://www.myminifactory.com/object/3d-print-50426
* Lace-up Tiled Vase: https://www.myminifactory.com/object/3d-print-45183
* Paintpot Planter: https://www.myminifactory.com/object/3d-print-40901
* Rustic Star Vase: https://www.myminifactory.com/object/3d-print-73918
* Quadratic Vase: https://www.myminifactory.com/object/3d-print-73047
* Pumpkin Jigsaw Vase: https://www.myminifactory.com/object/3d-print-72744
* Pinstriped Table Vase: https://www.myminifactory.com/object/3d-print-71432
And this premium design:
* Relic Vase: https://www.myminifactory.com/object/3d-print-79349
If you're wondering why I like vases so much, check out this video!
(don't forget to subscribe!)
* Vase Mode is Great!: https://youtu.be/tba6KHk4qRk
Designed for easy printing - the angles are all quite manageable, and there are no supports required!
| Date published | 21/05/2019 |
| Sin apoyo | YES |
0.175 layer height 5% infill 60 mm/s 5 top layers 3 bottom layers 3 outlines 14h print extrudr nx2 brown