Ornament#2
3,314
visitas
71
descargas
2
colecciones
0 comentarios
Cargando comentarios...
Ornament#2
3D
Published 2017-12-15T11:26:46+00:00
11
0
Add to Collection
Descripción
This object was made in Tinkercad. https://www.tinkercad.com/things/bCaaUoeWyw5
Ornament#2
Detalles de impresión
Prints great. You must have SUPPORTS EVERYWHERE to print this part as there are pieces that curl on themselves, and you can't print in thin air. .1-.2 mm layer height will work fine. Sliced and printed via cura. I printed with a brim. If you can manage, just do the supports on the wall, and don't have it print them inside, as they are really difficult to remove. At 50% scale it takes 3-4 hours to print with supports. At full scale it takes about 12 hours.
Información técnica
Date published | 15/12/2017 |
¿Cuándo tiempo lleva? | 180 - 840 minutos |
Cantidad de filamento | 55 |
Dimensiones | 100x100x128 |
Tecnología | FDM |
Complejidad | Medio |
Más información
Archivos