Part Connecting Pin Removable Fixing
Part Connecting Pin Removable Fixing
Published 2015-01-29T15:16:28+00:00
I designed this functional connecting pin to help me make objects larger than the print bed in pieces then assemble them afterwards to complete the part.
Alternatively it could be used to connect two smaller parts together so they can be connected and taken apart again.
This pin fits tightly inside the hole to create a frictional connection.
I made a cut all round the pin - allowing it to bend slightly to help when fitting it into the connecting hole.
This fixing is intended to make a removable connection between parts - so parts can be attached together then taken apart again.
This is a simple, useful, mechanical fitting intended for 3D printing - made to help you with fixing objects together without resorting to glue or other methods to bond parts together.
The parts can be scaled to be used in a wide range of objects.
The files have been provided in STl, OBJ and STEP file formats to allow them to be opened them in as many different CAD software’s as possible.
You can edit these parts to fit in with your design when creating a product, or sometimes it is just useful to be able to see how someone else has done it to help create your own.
These parts will print completely support free and require no cleaning up after the print has finished.
-Add negative hole connection to both sides of the part that you would like to connect together.
-Print as many pins as you need, upright on the print bed.
-To increase the strength of the pin, increase the level of infill of the part. I recommend no lower than 25% infill.
-These parts were printed using a 0.2mm layer resolution.
Date published | 29/01/2015 |
¿Cuándo tiempo lleva? | 30 - 60 minutos |
Cantidad de filamento | 13 grams |
Dimensiones | 15mm x 15mm x 40mm |
Complejidad | Muy fácil |
Sin apoyo | YES |