Pinewood Derby Car Stand
Pinewood Derby Car Stand
3D
Published 2018-09-20T03:12:15+00:00
Pinewood Derby Car Stand
I made this stand to showcase my son's champion pinewood derby car. The car already had a 1/8" hole drilled into the underside use for painting. So I simply fashioned a pin on the mount to hold the car to the stand.
Future Enhancements
Thread the mount post so it screws into the car for a more secure attachment to the stand
Add a removable placard that attaches to the riser that can include the child's name and other information
Print Time: 3 hours 7 minutes
Filament: 3D SolutTech PLA - Black
Bed Temp: 60c
Extruder Temp: 215c
Layer Height: 0.1mm
Top/Bottom Layers: 3
Perimeter Shells: 3
Infill: 20%
Infill Pattern: Rectilinear
Filament Length: 11700.1mm
Plastic Weight: 35.18g
Material Cost: $1.62
| Date published | 20/09/2018 |
| ¿Cuándo tiempo lleva? | 120 - 187 minutos |
| Cantidad de filamento | 35.18 |
| Sin apoyo | YES |