Print in Place template.
Sin soporte
Exclusivo MMF
12,167
visitas
900
descargas
10
colecciones
4 comentarios
Cargando comentarios...
Print in Place template.
3D
Published 2015-02-12T15:02:41+00:00
94
4
Add to Collection
Descripción
This template can be used to create articulated characters that print in place. This template was used in Francesco Orrù's Torbjorn. The main consideration to keep in mind when using this template is the character must be sitting up and the arms pointing up. The bottom which sits on the bed must be perfectly flat and level. When removing from the build plate the model will need to be force into moving, this can be done by gently forcing the joint- dont push too hard as this can break the joins.
Detalles de impresión
to print this successfully print it at 0.2mm layer height with no support the character must be sitting up strait with a flat and level bottom.
Información técnica
Date published | 12/02/2015 |
¿Cuándo tiempo lleva? | 120 - 130 minutos |
Dimensiones | 9.5cm x 6cm x 6cm |
Complejidad | Muy fácil |
Sin apoyo | YES |
Más información
Archivos