Printrbot Simple Metal spool base
4,756
visitas
109
descargas
1
colección
0 comentarios
Cargando comentarios...
Printrbot Simple Metal spool base
3D
Published 2015-06-21T12:44:14+00:00
2
0
Add to Collection
Descripción
Spool base for printrbot, enjoy!
Detalles de impresión
Add some ball brings and you will be good to go REPETIER HOST 1.0.6 Silc3r 1.1.7 SLIC3R SUPPORT OFF Size 0.4mm TEMP 195C no bed TEMP INFILL 30% SOLID LAYER EVERY 3 layers HONEY COMB INFILL for better shock absorption and structurally stronger (rectilinear is OK) TWO or THREE starting layers TWO or THREE final layers TWO external layers 40mm/s normal speed 60mm/s INFILL speed Support ON (in repetier, not in slic3r) Ball Bering 17mm External Diameter 6mm Internal Diameter 6mm thick
Información técnica
Date published | 21/06/2015 |
¿Cuándo tiempo lleva? | 5 - 5 minutos |
Cantidad de filamento | +-37800mm |
Dimensiones | 122mm X 94mm X 34mm after printed |
Complejidad | Muy fácil |
Más información
Archivos