Project 82 Battlecruiser Stalingrad - Printable
$25.00 Project 82 Battlecruiser Stalingrad - Printable
3D
Published 2018-10-29T11:47:49+00:00
This is a my version of a Battlecruiser Stalingrad-class inspired from the Soviet "1951" ship, now made popular at "world of warships".
The ship comes in parts as it is very long- 730mm.
Updated Hull (4th iteration) has watertight capability if printed right, sand sliced part of the hull and glue them together- use a M3 screw (20mm long) and a bolt to tighten the parts together.
Deck/superstructure parts can be screwed into the hull using M2 screw (6~8mm long).
for RC boat conversion- you will need to add weight on bottom of ship- otherwise ship will capsize.
use 0.15mm layer height with 0.7mm wall thickness (0.4mm nozzle) for hull and superstructure.
for gun barrels and modules such as radar/aircraft recovery system- use 0.4mm wall thickness (0.2mm nozzle/wall*2) with 0.1mm layer height. Enable brim if you are printing gun barrels/mast/radar module for better print adhesion.
AA guns - I'd only suggest printing AA barrels if you want to go the extra mile because they're really easy to break and printing barrles take rather long time.
ones included in files are pretty long- use slicers (I.E. netfabb standard) to customize length of AA gun barrel.
Also included are unsliced files of the hull/deck (superstructure) so people with smaller build plate can slice the file manually for printability. you'll have more gluing to do though.
| Date published | 29/10/2018 |
| Precio | $25.00 |
| ¿Cuándo tiempo lleva? | 4000 - 4001 minutos |
| Cantidad de filamento | 150g+ |
| Dimensiones | 740mm X 90mm X 140mm |