Prusa i3 MK3 Corner ENCLOSURE - IKEA LACK table
Prusa i3 MK3 Corner ENCLOSURE - IKEA LACK table
Published 2019-01-09T17:40:10+00:00
Prusa i3 MK3 Corner ENCLOSURE - Ikea LACK table
Top Corners inclueds brackets that allow you to use the original skrews that came with the Lack table.
I made the gaps a bit tighter so the Plexi won't slip out.
Let me know if it is good, too tight or too loose..
What you'll need :
Print :
1x Prusa_Enclosure_Top_Corners_2.5mm or 3mm version
1x Prusa_Enclosure_Bottom_Corners_2.5mm or 3mm version
2x Prusa_Enclosure_Door_2.5mm or 3mm version
1x Prusa_Enclosure_Filament_guide
Plexiglass dimensions:
2pcs: 435 x 440 mm, thickness 2.5mm or 3mm
2pcs: 435 x 495 mm, thickness 2.5mm or 3mm
Neodyme Magnets
8pcs: N52 disk 8x3mm
Screws
3pcs : Original Ikea Lack screw
3pcs : 5x120mm screw
2pcs : 5x1.5mm screw
Tools :
4mm & 5mm wood drill
16mm chamfer milling drill
Philips screwdriver
*UPDATE1*
With the 4th Leg, il build a Spool Holder
You'll need :
The 4th Leg
2pcs 5x120mm screw
10mm thick rod
Files used and modified :
- Door Handle keep closed - https://www.thingiverse.com/thing:36465
- Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table - Prusa Research - https://www.thingiverse.com/thing:2864118
Date published | 09/01/2019 |
Sin apoyo | YES |