Rail Mounted Trump
Rail Mounted Trump
3D
Published 2018-07-30T17:26:51+00:00
Get the Full write up on my blog.
## Summary
This part is printed in 2 separate parts, the [Donald Trump](https://www.thingiverse.com/thing:2071497) bust borrowed from [ZeroBeatPro](https://www.thingiverse.com/ZeroBeatPro/about), and the rail mounting part designed by me. I included two different versions of the rail.
For the rail you have two different files to choose from. The first option is a custom size used by [this Airsoft gun](https://www.amazon.com/gp/product/B074ND97GD) which is what I used as a case for my flamethrower, I believe the same dimensions work [The Boring Company *not a* Flamethrower](https://www.boringcompany.com/not-a-flamethrower/). The other included rail uses a standard Picatinny size.
## Print Settings
**Printer Brand:**
Creality
**Printer:**
Ender 3
**Rafts:**
No
**Supports:**
Yes
**Resolution:**
0.40 mm
**Infill:**
15%
**Rail:**
Build time: 1 hour 12 minutes
Filament length: 5737.7 mm
Plastic weight: 17.25 g (0.04 lb)
The rail I printed on its side with supports on the cylinder. I'd say printing in this orientation is pretty important because you want the layers going vertical so the smaller pieces of the rail attachment are strong as possible because thats definitely the weak point.
**Trump Bust:**
Build time: 3 hours 48 minutes
Filament length: 17912.3 mm
Plastic weight: 53.86 g (0.12 lb)
The Trump bust prints perfect without any supports, I used 15% infill but if you think this is going to get knocked around I would bump that number up a smidge.
| Date published | 30/07/2018 |
| ¿Cuándo tiempo lleva? | 4 - 5 minutos |
| Tecnología | FDM |
| Complejidad | Fácil |