Ridiculous Curve Lid Box
Ridiculous Curve Lid Box
Published 2019-02-22T14:50:10+00:00
You might also like these free designs!
* Starfish box: https://www.myminifactory.com/object/3d-print-85492
* Cog Twist Box: https://www.myminifactory.com/object/3d-print-71772
* Cog Stacker Box: https://www.myminifactory.com/object/3d-print-81938
* Hex Stacker Boxes: https://www.myminifactory.com/object/3d-print-81713
* Star Box: https://www.myminifactory.com/object/3d-print-80521
* Little Stacking Boxes: https://www.myminifactory.com/object/3d-print-81714
* Hex Twist Box: https://www.myminifactory.com/object/3d-print-77281
* Rainbow Hex Box: https://www.myminifactory.com/object/3d-print-77277
* Citrus Box: https://www.myminifactory.com/object/3d-print-75181
* Heart Box: https://www.myminifactory.com/object/3d-print-74727
* Jigsaw Boxes: https://www.myminifactory.com/object/3d-print-49533
* Crescent Twist Box: https://www.myminifactory.com/object/3d-print-71925
And this premium design:
* Vase Mode Hex Box: https://www.myminifactory.com/object/3d-print-79143
Not gonna lie, this was made just for the sake of being ridiculous! The box is shaped like a hexagonal prism that's had the top sliced off with a curve, and then a lid slides in along that curve. Crazily enough, it's all printable without support!
Enjoy!
The base is pretty simple - no overhangs or angles of any real steepness - even the slot for the lid is made up of intentionally mild angles for easy printing. The lid might be a bit challenging, though! Yes, it'll print on one edge without support, but you'll probably want a raft to keep it from falling over, unless you're really confident with your bed adhesion! The alternative would be to just print it flat-ish, with supports.
Date published | 22/02/2019 |
Thanks for the model!