Screw-in Container
4,362
visitas
348
descargas
3 comentarios
Cargando comentarios...
Screw-in Container
3D
Published 2017-02-20T12:50:38+00:00
29
3
Add to Collection
Descripción
Store small bolts, nuts or other things that are just to easy to loose in this container. It is securely held together by the integrated threads. Screw it shut like a jar of jam!
The threads will get smoother over time.
Prints without supports and at 0.2mm layer height. Designed for 0.4mm nozzles and with low material usage in mind but the wall thickness cannot be further reduced, or otherwise the threads would not be printable.
By the way.. could someone come up with a better name for this? :P
Información técnica
Date published | 20/02/2017 |
¿Cuándo tiempo lleva? | - 120 minutos |
Cantidad de filamento | 30 grams |
Dimensiones | 60mm diameter x 27mm |
Tecnología | FDM |
Sin apoyo | YES |
Más información
Archivos
A very stable screw cap container. I made it with support which took three hours to fix. The print turned out well with Aprintapro bronze PLA at 200 and 60 on the bed. Sliced with Cura 3.1 and both parts at once.