Self closing hinge, 90° snap
10,942
visitas
1,052
descargas
5
colecciones
1 comentarios
Cargando comentarios... 
Self closing hinge, 90° snap
3D
Published 2017-12-04T11:53:21+00:00
182
1
Add to Collection
Descripción
Straight self-closing hinge, snap at 90°.
Dimentions: 80x44x20 mm
Hole diameter: 6 mm
Detalles de impresión
Print the male part with the hinge pin vertical and the female part with the hole vertical. Only a small amount of support is required for the mounting holes and lower rounded corners.
Información técnica
| Date published | 04/12/2017 |
| ¿Cuándo tiempo lleva? | 88 - 88 minutos |
| Cantidad de filamento | 14g |
| Dimensiones | 54mm x 48mm x 44mm |
| Tecnología | FDM |
| Complejidad | Fácil |
Más información
Archivos
Printed at 100% infill with no supports. I also printed a set using supports, but I could tell they were not necessary, and the print came out cleaner without them. I plan to use on a set of small swinging doors on an outdoor playset. Great print!