Senary Vent Chandelier
$5.00 Senary Vent Chandelier
3D
Published 2018-05-22T09:24:22+00:00
Hi, if you like this check out my other creations and support me here.
This the forth in the series of T Light Chandeliers, this one uses 6 Tea Lights in the grouping and gets as high as my printer can go, they can be used singularly, in size groups or mixed and matched as you want. This one starts in the centre and spirals out like a staircase.
You can use LED Tealights instead of burning ones for peace of mind - they will fit too.
Inspired by the tube worms that live around Hydrothermal vents at depths of around 2.5 km this series of Chandeliers uses T Lights to their best advantage by grouping them together increasing their light out-put.
They lend an elegant functionality to any dining table or home, while mimmicking the gentle sway of marine environs.
I used a raft for this print as it makes removal from the print plate just so much easier.
Had to use supports to support the centre candle, it is very hard to remove (not a lot of space) but worth it.
Layer height 0.1mm
Walls 0.8
Infill 15%
Print speed 50mm/s
Adhesion- Raft
Print time- 36 hours or so
| Date published | 22/05/2018 |
| Precio | $5.00 |
| ¿Cuándo tiempo lleva? | 2160 - minutos |
| Cantidad de filamento | 175 grams |
| Dimensiones | 126mm x 120.5mm x 236mm |
| Tecnología | FDM |
| Complejidad | Fácil |
Printed at 75% height due to printer limitations, minimal support.