Springo Skull
Sin soporte
Destacado
56,604
visitas
10,769
descargas
45
colecciones
49 comentarios
Cargando comentarios... 
Springo Skull
3D
Published 2017-05-17T07:18:37+00:00
1038
49
Add to Collection
Descripción
What a spooky Springo!
Print at .15mm layer height and separate spring manually after printing, no supports required.
Licencia
Detalles de impresión
100% infill is recommended. Results vary by slicer, but basically make sure the layers above and below the small Springo gaps are printing solid. Simplify3D recognizes these as top and bottom layers so you can use a lower infill, but Cura won't recognize the layers as top/bottom, and therefor prints infill instead of solid.
Información técnica
| Date published | 17/05/2017 |
| Tecnología | FDM |
| Complejidad | Muy fácil |
| Sin apoyo | YES |
Más información
Archivos
I printed it in this in PLA from Cura on my Printrbot Metal Plus. Cura crashed and lost my settings, so I'm trying my best to remember, but I think I used a .15mm layer height 15% (could have been 25%) infill, 3 top and bottom layers, I used a box cutter inserted it into one of the slits and gradually turned the part pushing the part into the blade, not the blade into the part. I cam apart easier than I thought, but it still takes some time. I probably took me 5-10 mins to split mine apart. Otherwise, it looks great. I'll be bringing this to the STEAM Maker Fest in San Diego this summer. I think kids it'll get a kick out of it. Thanks Devin!