SP EyeWear 2
4,404
visitas
246
descargas
3
colecciones
0 comentarios
Cargando comentarios...
SP EyeWear 2
3D
Published 2017-02-17T19:07:43+00:00
24
0
Add to Collection
Descripción
An elegant design. The frame is ready to accept 6 base curve lenses.
Detalles de impresión
For the best printing result it is advised to use PVA for support material. Otherwise, it is important to use the suggested settings below.
For the temples you do not have to use brim; the two small pads help to bed adhesion.
Cura Settings
Layer Hight : 0.1mm ( or 0.06mm)
Support : Yes
Support Density : 20%
Support Z Distance : 0.2mm
Support Horizontal Expansion : 0.5mm
Enable Support Interface : Yes
Support Interface Thickness : 0.4mm
Support Interface Density : 100%
Brim : 1mm (if you have adhesion problems)
Información técnica
Date published | 17/02/2017 |
Tecnología | FDM |
Complejidad | Medio |
Más información
Archivos